18
4-3 Confirmation of mounting of body and guide
(1) Remove all dust from the body and guide
mounting surfaces shown in the figure on the
right. (If dust gets caught, it will reduce the
accuracy of the table.)
(2) Gently place the body onto the guide and combine them in the position shown below.
(1) Body pin hole (small hole) and guide block pin
(2) Floating part at rod end and U groove on floating part
Body pin hole
Enlarged view
Guide block pin
U groove on floating part
Floating part at rod end
Pin
Guide mounting surface
Body mounting surface
Mounting surface
Body
Table
Guide block
