![background image](http://html1.mh-extra.com/html/smc-networks/mxqr-6/mxqr-6_operation-manual_1299195021.webp)
21
(3) Fix accessories (parts for adjuster and stopper) by tightening the fixing bolts to the
torque specified in Table 2 using a torque wrench or torque driver.
Table 2 Tightening torque (for accessories)
Mounting part of adjuster (for
extension end) and stopper
Mounting part of adjuster (for
retraction end)
Model
Thread size
Tightening
torque Nm
Thread size
Tightening
torque Nm
MXQR 6
M2.5
0.5
M2.5
0.5
MXQR 8
M3
0.9
M3
0.9
MXQR12
M4
2.1
M4
2.1
MXQR16
M5
4.4
MXQR20
M6
7.0
M5
4.4
MXQR25
M8
18.0
M6
7.0
4-6 Completion of change
The adjuster has been changed from the left one to
the right one as shown in the figure on the right.
*The guide uses martensitic stainless steel.
Clean the product sufficiently to prevent
generation of rust.
4-7 Removal of cap
Remove the cap from the bottom of the
body using a hexagon wrench as shown in
the figure on the right.
変更前
変更後
Before change
After change
Cap
Table
Guide block
Body
Hexagon wrench