RockShox Duke SL Air Service Manual Download | Manualshive

Page: 1 / 11

background image

Service Guide

Table oof C

Contents

Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Remove the Lower Legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Removing the Hydra Air Spring Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation of the Hydra Air Spring Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Removal and Installation of the U-Turn Spring Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Servicing the Pure DeLite Rebound Damper (Duke SL Air and U-Turn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation of the U-Turn Spring Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Removal of the Internal Floating Piston (IFP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Assembling the Pure DeLite Damper: Setting the IFP Depth Inside the Pure Tube . . . . . . . . . . . . . . . . . . . . . . .8

Installing the Lower Legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Duke SL Air and U-Turn

For exploded diagram and part number information, refer to the 2003 Spare Parts Catalog, P/N 950-007563-00.

Contact your local distributor or visit the RockShox website at www.rockshox.com for ordering information.

Information contained in this publication is subject to change at anytime without prior notice.

For the latest technical information, visit our website at www.rockshox.com.

Names used in this manual may be trademarks or registered trademarks of others.

1
2
3
...
»

Summary of Contents for Duke SL Air












Reviews:

No comments

Related manuals for Duke SL Air

Brand: Panasonic Pages: 116

Toughbook CF-T7BWATAAM

Brand: Panasonic Pages: 12

Brand: FeiYu Tech Pages: 5

Brand: FEIYUTECH Pages: 19

Brand: FeiYu Tech Pages: 25

Brand: FEIYUTECH Pages: 16

Resusci Baby QCPR

Brand: laerdal Pages: 8

Brand: Yealink Pages: 2

Pedelec Impulse

Brand: Kalkhoff Pages: 230

Brand: BGS technic Pages: 5

Brand: PCB Piezotronics Pages: 7

Baby Go Round Twirl

Brand: Redkite Pages: 4

Brand: Compass Pages: 16

FDSB5481 Series

Brand: Viking Pages: 54

Brand: MTD Pages: 12

Brand: Pyle Pages: 4

Brand: Salton Pages: 12

Brand: travall Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands