Lochinvar ProtoNode Start-up Guide
Page 42 of 56
Appendix B.9 Create and Manage Individual Users
•
Type the IP Address of the ProtoCessor into the web browser or use the FieldServer Toolbox to
connect to the ProtoCessor, then login to the FieldServer.
•
Click on the Diagnostics tab at the top of the screen, then click on View in the navigation panel,
and then on Connections.
•
Click Setup in the Navigation panel.
•
Click User Management in the navigation panel.
•
Check that the Users tab is selected.
User Types:
Admin
– Can modify and view any settings on the FieldServer.
Operator
– Can only make changes to the writable device points on the FieldServer.
Viewer
– Can only view settings/readings on the FieldServer.
Figure 39: FS-GUI User Management
