Lochinvar ProtoNode Start-up Guide
Page 55 of 56
Appendix D
Reference
Appendix D.1 Specifications
ProtoNode FPC-N54
3
Electrical Connections
One 3-pin Phoenix connector with: RS-485/RS-232 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: RS-485 (Tx+ / Rx- / gnd)
One 3-pin Phoenix connector with: Power port (+ / - / Frame-gnd)
One Ethernet 10/100 BaseT port
Power Requirements
Input Voltage:
9-30VDC or 24VAC
Current draw:
24VAC 0.125A
Max Power:
3 Watts
9-30VDC .25A @12VDC
Approvals
CE and FCC class B & C part 15, UL 60950-1, WEEE compliant,
IC Canada, RoHS3 compliant, DNP 3.0 conformance tested,
REACH compliant
Physical Dimensions
4 x 1.1 x 2.7 in (10.16 x 2.8 x 6.8 cm)
Weight
0.4 lbs (0.2 Kg)
Operating Temperature
-20°C to 70°C (-4°F to158°F)
Humidity
10-95% RH non-condensing
Figure 46: Specifications
Appendix D.1.1 Compliance with UL Regulations
For UL compliance, the following instructions must be met when operating ProtoNode.
•
The units shall be powered by listed LPS or Class 2 power supply suited to the expected operating
temperature range.
•
The interconnecting power connector and power cable shall:
o
Comply with local electrical code
o
Be suited to the expected operating temperature range
o
Meet the current and voltage rating for ProtoNode
•
Furthermore, the interconnecting power cable shall:
o
Be of lengt
h not exceeding 3.05m (118.3”)
o
Be constructed of materials rated VW-1, FT-1 or better
•
If the unit is to be installed in an operating environment with a temperature above 65 °C, it should
be installed in a Restricted Access Area requiring a key or a special tool to gain access.
•
This device must not be connected to a LAN segment with outdoor wiring.
3
Specifications subject to change without notice.
