-18-
No.LFE****-OMZ0013
<Simple setting>
(1) Press the
button once in measurement mode.
[P_1] or [n_1] and the set value are displayed alternately.
(2) Press the
or
button to change the set value (P_1/n_1).
The
button is to increase and the
button is to decrease the set value.
- Press the
button once to increase the value by one digit, press and hold to continuously increase.
- Press the
button once to reduce the value by one digit, press and hold to continuously reduce.
(3) Press the
button to completed the setting.
The Flow switch turns on within a set flow range (from P1L to P1H) during window comparator mode.
Set P1L, the lower limit of the switch operation, and P1H, the upper limit of the switch operation, following
the instructions given above. (When reversed output is selected, the main screen displays [n1L] and
[n1H].)
When 2 output specification(LFE0A/LFE0B) is used, [P_2] or [n_2] is displayed. Continue with setting the
parameter.
(When reversed output is selected, the main screen displays [n_2]).
*: If a button operation is not performed for 30 seconds during the change of setting, the set value will
start flashing.
Displayed in turn
Normal output
Reversed output
Summary of Contents for LFE0 Series
Page 1: ...Doc No LFE OMZ0013 Product Name Flow Monitor Model Series Product Number LFE0 SMC Corporation ...
Page 36: ... 35 No LFE OMZ0013 List of output modes for fluid temperature ...
Page 42: ... 41 No LFE OMZ0013 F20 External input This item is not used for this specification ...
Page 66: ... 65 No LFE OMZ0013 Dimensions Front protective cover Panel mount adapter R ...