![background image](http://html.mh-extra.com/html/smc-networks/lfe0-series/lfe0-series_operation-manual_1300093013.webp)
-12-
No.LFE****-OMZ0013
Term
Meaning
P
Power saving mode
Number display is turned off to reduce power consumption.
R
Repeatability
Reproducibility of the display or analogue output value, when the measured quantity is
repeatedly increased and decreased.
Response time
The delay time until the set value reaches 63% in relation to the step input.
S
Set point range
The range of ON/OFF threshold values that can be set for those products with a switch
output.
Switch output
Output type that has only 2 conditions, ON or OFF.
In the ON condition any connected load will be powered.
In the OFF condition, there will be no power supplied to the load.
An output showing such behavior is called switch output.
T
Temperature
characteristics
Indicates the change in the display value and analogue output caused by ambient
temperature or fluid temperature changes.
W
Water hammer
Water hammer or impact pressure is a pressure surge due to pressure spread when a
fluid in motion is forced to stop or change direction when equipment such as valve, is
opened/closed.
Window comparator
mode
An operating mode in which the switch output is turned on and off depending on whether
the flow is inside or outside the range of two set values
Summary of Contents for LFE0 Series
Page 1: ...Doc No LFE OMZ0013 Product Name Flow Monitor Model Series Product Number LFE0 SMC Corporation ...
Page 36: ... 35 No LFE OMZ0013 List of output modes for fluid temperature ...
Page 42: ... 41 No LFE OMZ0013 F20 External input This item is not used for this specification ...
Page 66: ... 65 No LFE OMZ0013 Dimensions Front protective cover Panel mount adapter R ...