-57-
No.LFE****-OMZ0013
■ Setting and change of security code
By the default, the security code is set to [000]. You can change the security code from [000] to any number
by the following operations.
1. Suppose that [F81] Security code request is set to valid (page 46).
2. Activate the key-lock setting.
(1) Press and hold the
button for 5 seconds or longer in measurement mode.
The current setting will flash as [UNLoC] on the sub screen.
(2) Press the
or
button to select Lock [LoC].
。
(3) Press the S button to activate the key lock.
3. Deactivate the key-lock setting.
(1) Press and hold the
button for 5 seconds or longer in measurement mode.
The current setting will flash as [LoC] on the sub screen.
(2) Press the
or
button to select Unlock [UnLoC].
。
(3) After the
button is pressed, the system prompts you to enter the security code.
(4) Key in your security code.
(5) Press and hold the
button for 1 second or longer to enter the security code.
(6) When [UNLoC] is displayed in the sub screen, press the
and
buttons simultaneously for 5
seconds or longer.
[000] is displayed on the sub screen and the new security code should be entered.
Refer to page 56, (4) for input method.
Press the
button for 1 seconds or longer.
The new security code is displayed on the sub screen.
Press the
button for 1 seconds or longer.The change of security code is complete.
After the change, the status is [UNLoC]. To [LoC], perform key-lock setting again (page 55).
Summary of Contents for LFE0 Series
Page 1: ...Doc No LFE OMZ0013 Product Name Flow Monitor Model Series Product Number LFE0 SMC Corporation ...
Page 36: ... 35 No LFE OMZ0013 List of output modes for fluid temperature ...
Page 42: ... 41 No LFE OMZ0013 F20 External input This item is not used for this specification ...
Page 66: ... 65 No LFE OMZ0013 Dimensions Front protective cover Panel mount adapter R ...