Tension bolt (Short)
(Tightening torque: 0.8 N·m)
Tension bolt (Long)
(Tightening torque:
0.8 N·m)
a
-2
Connection bracket assembly
(2 sets)
(Tightening torque: 0.8 N·m)
DIN rail
Mounted only on the
DIN rail mounting type
(with DIN rail)
DIN rail holding screw
(Tightening torque: 1.4 N·m)
Intermediate SUP/EXH block assembly
(For P/E ports on the U side or both sides)
Clamp bracket
Mounted only on the
DIN rail mounting type
DIN rail holding screw
(Tightening torque: 1.4 N·m)
DIN rail holding screw
(Tightening torque: 1.4 N·m)
Clamp bracket
Mounted only on models with
a DIN rail mounting bracket
b
-1
b
-2
Connection bracket B (2 pcs.)
u
i
∗
Refer to page 101 for wiring.
For the manifold block
assembly, refer to the
exploded view on page 115.
t
Tie-rod (3 pcs.)
∗
If an intermediate SUP/EXH block
assembly is installed, select a tie-rod
that is 2 stations longer.
D
End block assembly
(Includes
a
and
b
)
C
a
-1
o
-3
o
-2
End plate U
!1
DIN rail mounting spacer
Mounted only on models
with a DIN rail mounting
bracket
!0
o
-1
End plate D
Holding screw
(Tightening torque: 1.4 N·m)
Holding screw
(Tightening torque: 0.7 N·m)
Holding screw
(Tightening torque: 1.4 N·m)
Holding screw
(Tightening torque:
0.35 N·m)
Details: p. 127
Details: p. 127
Tension bolt
(Tightening torque:
0.75 N·m)
JSY3000
Series
ZK2 Combination Manifold Exploded View
∗
For details on the ZK2 ejector unit and replacement parts for the manifold, refer to the ZK2
A series catalogue.
For the JJ5SY3-10-M (ZZK2
A)
o
Manifold end plate assembly
The assembly number includes end plate D, end plate U, and a
tension bolt assembly.
No.
Description
ZK2
Note
!0
Clamp bracket
ZK2-DA5-A
2 pcs. per set
!1
DIN rail mounting spacer
ZK2-EU3-A
Manifold Exploded View
ZZK2
A
Manifold end plate assembly
Refer to page 121 for the manifold part number.
S0
127