![background image](http://html1.mh-extra.com/html/smc-networks/jsy1000-series/jsy1000-series_manual_1299365115.webp)
Connector Connecting Base Manifold Exploded View
JSY1000/3000/5000
Series
Type
10
EX120
q
SUP/EXH block assembly
Manifold Parts Nos.
w
EX120 SI unit
Wiring
Communication protocol
DN1
DeviceNet™ (Positive common)
CS1
OMRON Corp.: CompoBus/S (16 outputs) (Positive common)
CS2
OMRON Corp.: CompoBus/S (8 outputs) (Positive common)
MJ1
CC-Link (Positive common)
CM1
CompoNet™ NPN (Positive common)
CM3
CompoNet™ PNP (Negative common)
Refer to pages 115 to 117 for
details on common parts.
JSY 3
C10
1M 1P 14A
Pilot, Silencer type
Symbol
Pilot type
Built-in
silencer
Internal
External
(Made to Order)
—
—
—
S
—
R
—
—
∗
The 3/5(E) port is plugged for the built-in
silencer type.
Mounting
—
Direct mounting
D0
DIN rail mounting (Without DIN rail)
Series
1
JSY1000
3
JSY3000
5
JSY5000
P, E port size (One-touch fi ttings)
Symbol
P, E port
JSY1000 JSY3000 JSY5000
C8
Ø 8 One-touch fi tting
—
—
C10
Ø 10 One-touch fi tting
—
—
C12
Ø 12 One-touch fi tting
—
—
00
∗
1
Plug
SUP/EXH block assembly (D side) accessories
and the number of accessories
Accessories
JSY1000/3000
JSY5000
a
Tension bolt
None
∗
1
3 pcs.
∗
1 Since the nuts are embedded in the SUP/EXH block
e
Clamp bracket
Series
Part no.
JSY1000
JSY11M-15P-1A
JSY3000
SY30M-15-1A
JSY5000
SY50M-15-1A
∗
The part number is for 1 piece.
EX120
DN1
S
Manifold exploded view
∗
1 Can be selected when the
pilot, silencer type symbol
is “—” or “S”
Not available for “R” type
e
q
w
EXH blocking disk
a
Tension bolt
SUP blocking disk
DIN rail holding screw
(Tightening torque: 1.4 N·m)
Holding screw
(Tightening torque: 1.4 N·m)
Clamp bracket
It is mounted only for the DIN rail mounting type.
The holding screw of the clamp bracket is tightened at two points.
∗
The clamp bracket fi xing method for the JSY1000 is different
depending on wiring. Refer to page 140.
U side
D side
115