- 11 -
System command (Index 0x02)
In the ISDU index 0x02 System Command, the command shown in the table below will be
issued.
The button of each system command is displayed on the IO-Link setting tool (excluding
"Param Download Store").
Click the button to send the system command to the E-P regulator.
This is system command configuration.
*1 to 3: Same definition as button operation.
Device access lock parameter(Index : 0x0C)
Refer to device access lock conditions below.
Data type
：
16Bit Record
Bit
Details
0
Not supported.
1
1: Data storage write access denied
0: No lock, data storage available
2
Not supported.
3
1
：
Key locked.
（
It is linked with the key lock of button operation.
）
0
：
Key lock de-activated
（
It is linked with the key lock of button operation.
）
4-15
Not supported.
Command
(decimal
number)
Command name
Details
0x05
(5)
Param Download Store
Back-up of the parameter set data.
When the electro-pneumatic regulator
receives a command, it starts uploading
the parameter settings to the master.
0x80
(128)
Device reset
Corresponds to power ON/OFF. Restart
the system.
0x81
(129)
Application reset*1
Reset function
Reset the Operation / standby mode
and key lock function.
0x82
(130)
Restore factory settings*2
Initialization function.
All parameter settings are returned to
the factory settings. All settings are
cleared.
0xA0
(160)
Zero Clear*3
Execute a zero-clear function.
