No.
5.
Precautions
Warning Handling
(1) If the system is expected to be dangerous when the Precision regulator, please
consider system with safety circuit to avoid danger.
Warning Operating Environment
(1) Do not operate in locations having an atmosphere of corrosive gases, chemicals,
sea water, water or steam, or where there will be contact with the same.
(2) Do not operate in locations where vibration or impact occurs.
(3) In locations which receive direct sunlight, provide a protective cover, etc.
(4) In locations near heat sources, block off any radiated heat.
(5) In locations where there is contact with spatter from water, oil or solder, etc.,
implement suitable protective measures.
Warning Air supply
(1) These products are designed for use with compressed air
or oxygen.
Contact SMC if any other fluid will be used.
(2) Do not use compressed air which includes chemicals, synthetic oils containing
organic solvents, salt, or corrosive gases, etc., as this can cause damage of
malfunction.
(3) If drains is not removed from air filters and mist separators, it can flow out to the
downstream side and lead to the malfunction of pneumatic equipment. In cases
where the management of drainage removal will be difficult, the use of filters with
auto drains is recommended
Warning Maintenance
(1) Incorrect handling of compressed air or oxygen is hazardous. Follow the product
specification. Element replacement and maintenance shall be performed by
person with knowledge and experience on pneumatic equipment.
(2) Rubber parts including diaphragm, “O” ring and packing are worn out.
Annual inspection or component replacement every 3 years is recommended.
(3) Please do the exhaust of the drain, washing the element, and the exchange, etc.
surely regularly. Please go to the standard though it differs according to the use
state every one month or three every months.
-7-
!
!
!
!
