SMC Networks HRGC001-A Series, Service Manual, Page: 55 / 102

HRX-MM-L012
Chapter 4 Service Procedure
HRGC Series 4.3 Replacement procedure
4-27
„ Mounting
1.
Remove the nut of the level switch.
2.
Mount the level switch onto the tank. (Nut x 1)
[Key point]
Face the detent of the level switch upward.
3.
Mount the connectors [LS1] (2pcs) of the level switch.
[Key point]
It does not matter which connector is mounted to which socket.
4.
Put wires into the locking adjuster clamp and close the clamp.
5.
Mount the lid of the tank.
Fig. 4-12 Detent of level switch
Detent
Seal
Level switch
Nut