- 29 -
No.EX
※※
-OMU1006-B
6.2. Production label
Firmware version (FW): 1.0.x (X is a number 0 or more)
Hardware version (HW): 03 and higher
Fig. 6-2 Production label
6.3. PROFIsafe address switch
An eight-bit DIP-Switch is provided for the F_Address of PROFIsafe. The switch setting is only checked at
power-up. Any changes made during operation are ignored and may lead to problems during the next
power-up sequence
Using the DIP switches:
・
Unscrew the cover and hinge it upwards.
・
The DIP switches can be adjusted with a small flat-blade screwdriver.
・
Tighten the cover again, making sure that the seals are positioned correctly. (torque = 0.3 Nm)
Fig. 6-3 PROFIsafe address switch
Note:
The F-Address bit numbering shown on the label has priority over any numbers printed on the DIP switch.
The default state (factory setting) for this DIP switch is all OFF.
Product number
MAC address
Firmware and Hardware version
F-Address
bit No.
F-Address
value
PCB
4 3 2 1 0
7 6 5
128
64
32
16
8
4
2
1
OFF
ON
2020-10-30 10:03
DL085648
