![background image](http://html1.mh-extra.com/html/smc-networks/e-my2b-series/e-my2b-series_operation-manual_1299534009.webp)
means ON, means OFF
14
15
Gener
al
3 positions
5 positions
Gener
al
Gener
al
3 positions
5 positions
Gener
al
Setting Procedures
Confirm the product is installed and connected properly and perform setting in the following
procedure.
!
Setting
Example of Internal Circuit and Wiring (continue)
Output signal
means ON, means OFF
Input signal
Signal through I/O cable
Actuator condition
OUT1
When motor side positioning completed
When end side positioning completed
When Intermediate stop positioning completed
During actuating
OUT2
OUT3
Symbol
Command
IN1
Command to operate motor side
Command to operate end side
Command to operate intermediate stop
IN2
Symbol
Connection of the motor and the controller
(When controller separated type is used)
•Mind the direction of the connector and insert them until they click when connecting the cable.
•When pulling out the cable, pull them out while pressing connector lever.
Motor cable of
the actuator
Encoder cable of
the actuator
Encoder cable of
the controller
Connector
Motor cable of
the controller
Lever
Lever
Connector
Turn off the power during connecting.
The slider may run suddenly.
Do not pull the cable forcefully when
removing attaching / detaching the
connector.
Cable might be disconnected.