12
Activate your browser, and
disable the proxy
or
add the IP address of this product into the
exceptions
. Then, type this product’s IP address in the Location (for Netscape) or Address (for
IE) field and press ENTER. For example:
http://192.168.2.1
.
After the connection is established, you will see the web user interface of this product. There are
two appearances of web user interface: for general users and for system administrator.
To log in as an administrator, enter the system password (the factory setting is ”
smcadmin
”) in
the
System Password
field and click on the
Log in
button. If the password is correct, the web
appearance will be changed into administrator configure mode. As listed in its main menu, there
are several options for system administration.
Status
Summary of Contents for Barricade SMCWBR 14-GM
