47
Enable the 802.1X (check the “Enable checkbox“).
Enter the RADIUS server IP.
Enter the shared key. (The key shared by the RADIUS server and DUT).
We will change 802.1X encryption key length to fit the variable test
condition.
Setup Network adapter on PC
1. Choose the IEEE802.1X as the authentication method. (Fig 2)
Note.
Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade to service
pack 1, then they can’t see MD5-Challenge from EAP type list any more, but they will get a new
Protected EAP (PEAP) option.
2. Choose MD5-Challenge or Smart Card or other Certificate as the EAP type.
3. If choosing use smart card or the certificate as the EAP type, we select to use a certificate on
this computer. (Fig 3)
4. We will change EAP type to fit the variable test condition.
Summary of Contents for Barricade SMCWBR 14-GM
