SMC Networks Barricade SMCBR14UP User Manual Download | Manualshive

Page: 67 / 77

background image

F. I am having problems establishing a PPPoE xDSL WAN connection

Some ISP’s require you to enter the domain name in addition to your username and password. For

, enter

bellsouth.net and Mindspring

bscribers enter [email protected]. Lastly, Earthlink subscribers should enter either

[email protected] or ELN/[email protected].

G. Can I use this router with AOL DSL?

This is true in most scenarios. Please verify with AOL that your particular connection type is PPPoE. If
yes, then the SMC Broadband Router should work with your WAN connection. Follow the normal
procedures as described in Section 7.3 of this manual, but while doing so, set the MTU value to 1400.
AOL DSL does not allow for anything higher than 1400.

H. I forgot my password and can no longer log into the router

You should restore your router to factory defaults via its hardware reset button. Locate the reset button (to
the right of the power input). While the device is powered on, use a paper clip to depress this button for
about 5-7 seconds and then release. Now you have completed the reset to factory defaults.

I. Upgrading the firmware

New firmware revisions will be made available as necessary when new product features or functionality is
released. You should check http://www.smc.com on a periodic basis for these updates. If a new version is
available, check the release notes to be sure of what has been changed/added and then you can decide if
you wish to complete the upgrade. Then download and unzip the firmware file. Log into the web-based
administration of the SMC Router, click TOOLS, then click FIRMWARE UPGRADE and browse to the
new firmware file. Then click the “BEGIN UPGRADE” button to upload the firmware to he SMC Router.
Once this is completed, be sure to reset the router to factory defaults and reconfigure you WAN

instance, for SBC Global, enter [email protected]. For Ameritech users
[email protected]. BellSouth users may need to enter username@
su

t

r

connection before continuing to use it.

67

«
...
65
66
67
68
69
...
»

Summary of Contents for Barricade SMCBR14UP














































































Reviews:

No comments

Related manuals for Barricade SMCBR14UP

Brand: H3C Pages: 34

OfficeConnect 3CRWDR100B-72

Brand: 3Com Pages: 118

Brand: GeoVision Pages: 69

Brand: TP-Link Pages: 2

Brand: TERABEAM Pages: 10

Brand: Salto Pages: 3

Brand: Datacom Pages: 105

airBridge TOTAL

Brand: SmartBridges Pages: 21

Brand: nedis Pages: 3

Brand: Xiaomi Pages: 3

Brand: Xirrus Pages: 3

Brand: IP-COM Pages: 15

Brand: IP-COM Pages: 63

Brand: Redpine Signals Pages: 62

Brand: EnGenius Pages: 2

Conduit AP MTCAP-868-002A

Brand: Multitech Pages: 30

Brand: PI Manufacturing Pages: 23

Brand: Ebyte Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands