Now select
Change...
from within the
LPR Printer Selection
section
Select the printer that is attached to the printer server from the list.
Press
Select
to return to the previous window
Now enter the the IP address of the Printer Server as the
Printer Address
. This is normally 192.168.2.1
unless you have changed it something else.
The
Queue
should be entered as
LP
for a DB25 (parallel) printer or
LPUSB
for a USB printer.
Now press
Verify
. This will confirm that the computer can communicate with the printer server.
NOTE
–
This does not verify that the printer is actually working only that the IP address is correct.
Once verified then press
OK
to return to the previous window
Step 4 – Create the printer
Press
Create...
in the bottom right hand corner of the window
The computer will now prompt for the printer name and location to save the configuration.
Enter the name and location and press
OK
to create the new printer.
63
Summary of Contents for Barricade SMCBR14UP
Page 1: ......
