C
HAPTER
4
| Configuring the Router
Advanced Routing
– 99 –
A
DVANCED
R
OUTING
Select
static routing list
from the menu; you can configure the static
route in the next screen (
). A static route is a pre-determined
path that network information must travel to reach a specific host or
network.
Figure 88: Static Routing
To add static routing entries:
1.
Click Add New.
Figure 89: Add or Modify a Static Route Entry
2.
Enter the following data:
◆
Destination IP Address
- The Destination IP Address is the address
of the network or host that you want to assign to a static route.
◆
Subnet Mask
- The Subnet Mask determines which portion of an IP
Address is the network portion, and which portion is the host portion.
◆
Gateway
- This is the IP Address of the gateway device that allows for
contact between the Router and the network or host.
3.
Select Enabled or Disabled for this entry on the Status pull-down list.
4.
Click the Save button to make the entry take effect.
