![background image](http://html1.mh-extra.com/html/smc-networks/barricade-n-smcwbr14sn5v2/barricade-n-smcwbr14sn5v2_user-manual_1300259060.webp)
C
HAPTER
4
| Configuring the Router
Wireless
– 60 –
Figure 42: Wireless Menu
W
IRELESS
S
ETTINGS
(R
OUTER
M
ODE
)
Choose menu
Wireless -> Wireless Setting
; you can configure the basic
settings for the wireless network on this page.
The wireless settings section displays configuration settings for the access
point functionality of the Wireless AP/router. It includes the following
sections:
Figure 43: Wireless Settings (Router Mode)
◆
SSID
- Enter a value of up to 32 characters. The same SSID (Service
Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be “SMC”. This value is case-
sensitive. For example, “TEST” is NOT the same as “test”.
◆
SSID (2-4)
- Up to four SSIDs for each BSS can be set, the names can
be up to 32 characters. The multi-SSID function is available only when
Enable is checked.
◆
Region
- Select your region from the pull-down list. This field specifies
the region where the wireless function of the Router can be used. It
may be illegal to use the wireless function of the Router in a region