C
HAPTER
3
| Quick Installation Guide
Quick Installation Guide
– 38 –
the Router without encryption. It is recommended strongly that you
choose one of following options to enable security.
■
WPA-PSK/WPA2-PSK
- Select WPA based on pre-shared
passphrase.
●
PSK Password - You can enter ASCII or Hexadecimal characters.
For
ASCII
, the key can be made up of any numbers 0 to 9 and
any letters A to Z, the length should be between 8 and 63
characters.
For
Hexadecimal
, the key can be made up of any numbers 0 to
9 and letters A to F, the length should be between 8 and 64
characters.
Please also note the key is case sensitive, this means that upper
and lower case keys will affect the outcome. It would also be a
good idea to write down the key and all related wireless security
settings.
■
No Change
- If you chose this option, wireless security
configuration will not change.
These settings are only for basic wireless parameters. For advanced
6.
Click the Next button. You will then see the Finish page.
If you don’t make any changes on the
Wireless
page, you will see the
Finish
page, as shown in
. Click the
Finish
button to finish
the
Quick Setup
.
Figure 15: Quick Setup – Finish
If there is something changed on the Wireless page, you will see the
Finish page as shown in
. Click the Reboot button to make
your wireless configuration to take effect and finish the Quick Setup.
