manualshive.com logo in svg

SMC Networks 8612T2 - annexe 1, Management Manual

Share
Download
SMC Networks 8612T2 - annexe 1 Management Manual Download Page 437

L

INK

 A

GGREGATION

 C

OMMANDS

4-189

Command Mode 

Interface Configuration (Ethernet)

Command Usage 

• The ports on both ends of an LACP trunk must be configured for full 

duplex, either by forced mode or auto-negotiation. 

• A trunk formed with another switch using LACP will automatically be 

assigned the next available port-channel ID.

• If the target switch has also enabled LACP on the connected ports, the 

trunk will be activated automatically. 

• If more than four ports attached to the same target switch have LACP 

enabled, the additional ports will be placed in standby mode, and will 
only be enabled if one of the active links fails. 

Summary of Contents for 8612T2 - annexe 1













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands