manualshive.com logo in svg

SMC Networks 8612T2 - annexe 1, Management Manual

Share
Download
SMC Networks 8612T2 - annexe 1 Management Manual Download Page 411

DNS C

OMMANDS

4-163

Related Commands 

ip domain-name (4-159)
ip domain-lookup (4-163)

ip domain-lookup

This command enables DNS host name-to-address translation. Use the 

no

 

form to disable DNS.

Syntax 

[

no

] 

ip domain-lookup

Default Setting 

Disabled

Command Mode 

Global Configuration

Command Usage 

• At least one name server must be specified before you can enable DNS. 
• If all name servers are deleted, DNS will automatically be disabled.

Example

This example enables DNS and then displays the configuration.

Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
    DNS enabled
Default Domain Name:
    .sample.com
Domain Name List:
    .sample.com.jp
    .sample.com.uk
Name Server List:
    192.168.1.55
    10.1.0.55
Console#

Summary of Contents for 8612T2 - annexe 1













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands