manualshive.com logo in svg

SMC Networks 8612T2 - annexe 1, Management Manual

Share
Download
SMC Networks 8612T2 - annexe 1 Management Manual Download Page 409

DNS C

OMMANDS

4-161

Command Usage 

• Domain names are added to the end of the list one at a time. 
• When an incomplete host name is received by the DNS server on this 

switch, it will work through the domain list, appending each domain 
name in the list to the host name, and checking with the specified 
name servers for a match.

• If there is no domain list, the domain name specified with the 

ip 

domain-name

 command is used. If there is a domain list, the default 

domain name is not used.

Example

This example adds two domain names to the current list and then displays 
the list.

Related Commands 

ip domain-name (4-159)

Console(config)#ip domain-list sample.com.jp
Console(config)#ip domain-list sample.com.uk
Console(config)#end
Console#show dns
Domain Lookup Status:
    DNS disabled
Default Domain Name:
    sample.com
Domain Name List:
    sample.com.jp
    sample.com.uk
Name Server List:
Console#

Summary of Contents for 8612T2 - annexe 1













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands