SMC Networks 8612T2 - annexe 1, Management Manual

Page: 306 / 556

C
OMMAND
L
INE
I
NTERFACE
4-58
Event Logging Commands
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The
no form disables the logging process.
Syntax
[ no ] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the
logging history command to control the type of error
messages that are stored.
Table 4-16 Event Logging Commands
Command Function Mode Page
logging on Controls logging of error messages GC 4-58
logging history Limits syslog messages saved to switch
memory based on severity GC 4-59
logging host Adds a syslog server host IP address that will
receive logging messages GC 4-60
logging facility Sets the facility type for remote logging of
syslog messages GC 4-61
logging trap Limits syslog messages saved to a remote
server based on severity GC 4-62
clear logging Clears messages from the logging buffer PE 4-62
show logging Displays the state of logging PE 4-63