manualshive.com logo in svg

SMC Networks 8612T2 - annexe 1, Management Manual

Share
Download
SMC Networks 8612T2 - annexe 1 Management Manual Download Page 117

A

CCESS

 C

ONTROL

 L

ISTS

3-67

•

Ethernet Type

 – This option can only be used to filter Ethernet II 

formatted packets. (Range: 600-fff hex.)

A detailed listing of Ethernet protocol types can be found in RFC 
1060. A few of the more common types include 0800 (IP), 0806 (ARP), 
8137 (IPX). 

•

Ethernet Type Mask

 – Protocol bitmask. (Range: 600-fff hex.)

•

Packet Format

 – This attribute includes the following packet types:

-

Any 

– Any Ethernet packet type.

-

Untagged-eth2 

– Untagged Ethernet II packets.

-

Untagged-802.3 

– Untagged Ethernet 802.3 packets.

-

Tagged-eth2 

– Tagged Ethernet II packets.

-

Tagged-802.3 

– Tagged Ethernet 802.3 packets.

Command Usage

Egress MAC ACLs only work for destination-mac-known packets, not for 
multicast, broadcast, or destination-mac-unknown packets.

Summary of Contents for 8612T2 - annexe 1













































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands