SMC Networks 2552W-G2, User Manual

Page: 78 / 294

System Configuration
5-32
5
CLI Commands for Downloading Software from a TFTP Server – Use the copy tftp
file command from the Exec mode and then specify the file type, name, and IP
address of the TFTP server. When the download is complete, the dir command can
be used to check that the new file is present in the access point file system. To run
the new software, use the
reset board command to reboot the access point.
Enterprise AP#copy tftp file
6-55
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:1
TFTP Source file name:img.bin
TFTP Server IP:192.168.2.29
Enterprise AP#dir
6-57
File Name Type File Size
-------------------------- ---- -----------
dflt-img.bin 2 1319939
img.bin
2 1629577
syscfg 5 17776
syscfg_bak 5 17776
262144 byte(s) available
Enterprise AP#reset board
6-10
Reboot system now? <y/n>: y