SMC Networks 2552W-G2, User Manual

Page: 210 / 294

Command Line Interface
6-72
6
Default
0 (disabled)
Command Mode
Global Configuration
Example
Filtering Commands
The commands described in this section are used to filter communications between
wireless clients, control access to the management interface from wireless clients,
and filter traffic using specific Ethernet protocol types.
filter local-bridge
This command disables communication between wireless clients. Use the no form
to disable this filtering.
Syntax
filter local-bridge
no filter local-bridge
Default
Disabled
Command Mode
Enterprise AP(config)#mac-authentication session-timeout 1
Enterprise AP(config)#
Table 6-14. Filtering Commands
Command Function Mode Page
filter local-bridge Disables communication between wireless clients GC 6-72
filter ap-manage Prevents wireless clients from accessing the
management interface
GC 6-73
filter uplink enable Ethernet port MAC address filtering GC 6-73
filter uplink Adds or deletes a MAC address from the filtering table GC 6-74
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Ethernet packets against the protocol filtering table
GC 7-74
filter ethernet-type
protocol
Sets a filter for a specific Ethernet type GC 6-75
show filters Shows the filter configuration Exec 6-76