SMC Corporation HRS018-A 20 R Series Operation Manual Download Page 59

Page: 59 / 162

HRX-OM-W058

Chapter 5 Display and setting of various functions

HRS-R Series

5.1

List of function

5-1

Chapter 5 Display and setting of

various functions

5.1 List of function

The product can have the displays and settings shown in table 5-1.

Table 5-1

List of function

Function

Outline

Reference

page

Main display

Displays the current temperature of the circulating fluid, discharge
pressure of the circulating fluidhange the circulating fluid temperature.

5.3

Alarm display menu

Indicates alarm number when an alarm occurs.

5.4

Inspection monitor
menu

Product temperature, pressure and accumulated operating time can be
checked as daily inspection. Use these for daily inspection.

5.5

Key-lock

Keys can be locked so that set values cannot be changed by operator
error.

5.6

Timer for operation
start/stop

Timer is used to set the operation start/stop.

5.7

Signal for the
completion of
preparation

A signal is output when the circulating fluid temperature reaches the set
temperature, when using contact input/output and serial communication.

5.8

Offset function

Use this function when there is a temperature offset between the
discharge temperature of the thermo-chiller and the

customer’s device.

5.9

Reset after power
failure

Start operation automatically after the power supply is turned on.

5.10

Anti-freezing function

Circulating fluid is protected from freezing during winter time or night time.
Set beforehand if there is a risk of freezing.

5.11

Key click sound
setting

Operation panel key sound can be set on/off.

5.12

Changing temp. unit

Temperature unit can be changed.
Centigrade (

⇔

Fahrenheit (

5.13

Changing pressure
unit

Pressure unit can be changed.
MPa

⇔

PSI

5.14

Setting of alarm
buzzer

Alarm sound can be set to on/off.

5.15

Alarm customizing

Operation during alarm condition and threshold values can be changed
depending on the alarm type.

5.16

Data reset

Functions can be reset to the default settings (settings when shipped from
the factory).

5.17

Accumulation time
reset

Reset function when the pump, the fan, or the compressor is replaced.
Accumulated time is reset.

5.18

Communication

This function is used for contact input/output or serial communication.

5.19

Option

[Automatic water-fill
port ]

This function is available for customer who selected option [Automatic
fluid filling] (Refer to P2-1 Name and Function of Parts)

6.1

Read and understand this manual carefully before changing the
settings.

Summary of Contents for HRS018-A 20 R Series



































































































































































Search results

Summary of Contents for HRS018-A 20 R Series

Reviews:

Related manuals for HRS018-A 20 R Series

Brands by name

Popular brands

SMC Corporation HRS018-A 20 R Series, Operation Manual

Search results

Summary of Contents for HRS018-A 20 R Series

Reviews:

Related manuals for HRS018-A 20 R Series

Brands by name

Popular brands