Pressing the ‘>’ key, Smarty asks you to turn on the ignition key to retry the connection:
When the connection has been established, if no DTC codes are present, the following page appears:
If one or more DTC’s are stored, Smarty shows the number of DTC’s present with the following page:
With the keys ‘<’ and ‘>’ all the present DTC codes can be displayed, one code at a time with the
following page:
The first line of display shows the DTC “P” code. The second line shows the DTC code description.
If the DTC code description is longer that the physical dimension of the display, the description
rotates continuously.
Some DTC codes could have no description. In that case, the message “
See documentat
.” Appears.
See appendix B of this manual for a complete listing of the DTC codes.
Clearing DTC codes
At the end of the visualisation of the last DTC code present, Smarty propose to clear all the stored
DTC codes from the ECM memory:
Pressing the ‘1’ key, all the DTC codes stored in the ECM memory are erased.
Pressing the ‘2‘ key, the DTC’s will not be erased.
When the erasing operation has been completed, the following page appears:
7. ABS Update
Tire height update
Once Smarty is VIN# Locked (i.e. a CaTCHER software has been loaded in the ECM) the
speedometer of the vehicle can be adjusted according to the tire height.
To update the tire height you have to choose the ABS update function in the main menu:
Pressing the ‘1’ key, the second menu appears:
Pressing the ‘2’ key, Smarty will try to establish the communication with the ABS.
If the Key was not turned into the on position Smarty will display this message:
Page 12 of 20