4
5
6
· You can set the required water change interval
days in units of days. For example, if you set the
parameter to 01, the device will automatically
change water once a day.
·
Project location:
F1S4-B-XX
· Effective the day after the setting is completed.
·
Project location:
F1S4-A-XXXX
· You can set the required interval for
changing the water in minutes. For example, if
you set this parameter to 60, it means
changing the water every hour.
·
Project location:
F1S3
· ATO and AWC buttons can increase or
decrease the value,
· You can arbitrarily set the required
amount of single water change.
· Setting range is 1-9999, the unit is liter
· Effective the day after the setting is completed
.
· You can specify the exact time when water
change starts. For example, 12:30 means start the
scheduled water change task at 12:30.
·
Project location:
F1S4-B-XX-XX: XX
1
2
1
·
Press and hold the Set button for 5 seconds to
enter the setting mode. At this time, you can
switch between categories (F) by clicking the ATO
or AWC button.
·
When F1 is displayed on the screen, press the
Set button again to display F1S1. At this time,
you can switch between various settings (S1-S6)
by clicking the ATO or AWC button.
2
·
Project location:
F1S2
· Option A: Simultaneous water inlet and
outlet mode
· Default: A
· Option B: Drain first, then water
8
·
If you make the above settings correctly, the
system can run fully automatically in the way you
specify. The device also provides other advanced
functions. Please set as needed.
Summary
3
Cycle
· Option B: Change the water interval in days.
·
Project location:
F1S4
· Option A: Intermittent water change in minutes
· Default: B
Intermittent
Interval
10
Switch
category
Run mode
Volume
Time
7
·
Project location: F4S1
· Set the correct current time for the system,
so that the automatic water change task can
be performed accurately at the time you set.
System
clock
Advanced settings (recommended)
9
Switch
settings
