Smart Power Systems Network Power Management System
16
[Envir]
Following items can be displayed/configured through the Envir page. Note that Envir Tab
only appears when an environmental sensor is connected to the NPMCARD.
[Envir->Status]
Display the basic information of the environmental sensor and contact closure
inputs.
Item
Definition
Information
Name
The name of the environmental sensor.
Location
The location of the environmental sensor.
Temperature
Current Value
The current environmental temperature.
Maximum
The highest temperature and time detected by the environmental sensor.
Minimum
The lowest temperature and time detected by the environmental sensor.
Humidity
Current Value
The current environmental humidity.
Maximum
The highest humidity and time detected by the environmental sensor.
Minimum
The lowest humidity and time detected by the environmental sensor.
Contact
Display the name and status (Normal/Abnormal) of each input dry contact.
[Envir->Configuration]
Configure the parameters of the environmental sensor.
Item
Definition
Information
Name
The name used to identify the environmental sensor.
Location
The place where the environmental sensor is located.
Temperature
High Threshold
Upper limit for normal temperature.
Low Threshold
Lower limit for normal temperature.
Hysteresis
The point at which the difference between the High and Low temperature
threshold changes from abnormal to normal.
Rate of Change
The rate used to define an abnormal change in temperature.
Unit
The unit of temperature measurement.
Humidity
High Threshold
Upper limit for normal humidity.
Low Threshold
Lower limit for normal humidity.
Hysteresis
The point at which the difference between the High and Low humidity
threshold changes from abnormal to normal.
Rate of Change
The rate used to define an abnormal change in humidity.
Contact
Enter the name of each input dry contact relay and use the dropdown
menu to define the normal status of each one.
