Smart Power Systems Network Power Management System
11
[UPS->Master Switch]
Switch the output power of the UPS/iPCS to be on or off.
Item
Definition
Reboot UPS
Turns the UPS/iPCS off and back on
Turn UPS Off
Turns the UPS/iPCS off.
UPS Sleep
This command is available in Utility Power Failure Mode. It puts the
UPS in sleep mode until power is restored.
Note: Some UPS/iPCS models may not support this command.
Reset
Cancels the pending action to turn the UPS/iPCS off.
Signal Smart PowerMaster
Clients to Shutdown
Select this option to warn Smart PowerMaster Enterprise Edition
Clients before turning the UPS/iPCS off. The Shutdown Delay (MST,
Max Clients Shutdown Time) for the UPS/iPCS can be changed to
insure a graceful shutdown.
[UPS->Outlet Action->Outlet Management]
The
Outlet Management
pages provides outlets
various setting configuration.
Item
Definition
Outlet Name
The name used to identify each outlet.
Action Configuration
Power On Delay
Delay time before turning on the outlet after a Turn On delayed
command. Allowed values are within the range of 1 to 7200 seconds
(2 hours) or Never (never turn on).
Power Off Delay
Delay time before turning off the outlet after a Turn Off delayed
command. Allowed values are within the range of 1 to 7200 seconds
(2 hours) or Never (never turn off).
Reboot Duration
Duration time the outlet will remain off during a Reboot action.
Allowed values are within the range of 5 to 60 seconds.
