Smart Power Systems Network Power Management System
15
[UPS->Wake on Lan]
This function is used to wake a computer through the network. Enter the IP
address of that computer when it is on and the system will search its MAC address accordingly.
The maximum number of IP addresses that can be set is 50.
Item
Definition
Smart PowerMaster Enterprise Client
Load/Sync with Smart
PowerMaster Enterprise
Client List
Load and Sync with Smart PowerMaster Enterprise Client List. Wake
on the Smart PowerMaster Enterprise Client network device on
power event.
Wake Conditions
UPS/iPCS Turn On
When selected, this option will enable the NPMCARD to send the
WoL signal to the connected Smart PowerMaster Enterprise Clients
computers when the UPS turns on.
Utility Power Restore
and Output is Supplied
When selected, this option will enable the NPMCARD to send the
WoL signal to the connected Smart PowerMaster Enterprise Clients
computers when utility power is restored and UPS output is on.
WoL Lists
WoL Manual List
Wake on Lan manual list.
Note: The Smart PowerMaster Enterprise Client computer's BIOS settings need to support WoL
and be configured accordingly.
[UPS->
Smart PowerMaster Enterprise
List]
Display the Information of the connected Smart
PowerMaster Enterprise Edition Clients. The connection is established by Smart PowerMaster
Enterprise Edition Clients. The listed clients will be removed if disconnected for 1 hour.
Item
Definition
Configuration
Max Clients Shutdown
Time (MST)
The max time that all the connected clients require to shutdown.
Max Clients Shutdown
Delay Time (MSDT)
The max value required from the moment utility power fails until all
the clients gracefully shutdown.