US SL-608 OUTDOOR High Lifter 01/2017
26
Fault on lift actuator
Actuator for telescopic arm
Actuator for tilt function
If the lift actuators, or one of these, stop due to
”unbalanced” load, one of the safety switches under the
actuators will have switched off the power supply. The
following may be done to re-establish normal function:
Pushing the operation panel button repeatedly to
function ”down” will run lift actuators to bottom
position, and both actuators should run synchronously
again.
Safety switch for non-synchronous
running on actuator
Service sticker – According to legislation SL-
OUTDOOR must be serviced once a year
Here, too, all lines should be
undamaged, and placed correctly at
lead-ins etc.
© 2006 Copyright. www.smartlift.dk
© 2006 Copyright. www.smartlift.dk
