US SL 608 Outdoor High Lifter - 01/2018
16
Manual extension
How to operate the manual extension
Before you start, make sure the main carrying
arm is in the horizontal position
Pull out and lay split A to one side.
Pull out and lay bolt B to one side.
Pull or push the manual extension arm to the
desired position.
There is a distance of 11.8 in between each
hole.
NB! The fourth hole is the last one. Take care
not to pull the extension arm too far or it will
fall off.
Tilt bolt B sideways until it slides into the hole.
Slide bolt B fully into place.
When the bolt is in place, slide split A
through the bolt hole. To lock the split, turn
the ring down over the bolt end.
A
B
A
B
As operator, you are
responsible for correct and safe
operation. If you are in any
doubt, do not use this function.
