US SL 608 Outdoor High Lifter - 01/2018
17
Extra movement in tip function
The machine's tip head has two positions. The purpose of both is to increase the manoeuvrability
of the machinery.
The red arrows indicate these two positions.
Before you start to change tip head position,
ensure that the vacuum yoke is resting on
firm ground/flooring.
When the yoke has settled, loosen the nut.
Carefully remove the bolt and lay to one side.
Use 2 x 0.9 in spanners.
Using the machine's remote control unit and
the electrical functions, align the holes in the
new position. When the holes are aligned,
you can easily push the bolt into place.
Turn the nut and tighten a little. You should
be able to turn the nut and bolt with your
fingers but there should be no lateral
slippage.
As operator, you are
responsible for correct and safe
operation. If you are in any
doubt, do not use this function.
