HMC9000 Diesel Engine Controller User Manual
HMC9000 Diesel Engine Controller 2015-12-25 Version 1.3 Page 10 of 52
5.2 LCD DISPLAY
5.2.1 Main Screen
The main screen displays revolution meter (0~3000r/min), thermograph (0~150 ºC; related sensor is
user-configurable, for example: HMC9000 sensor 1), oil manometer (0~1000kpa; related sensor is
user-configurable, for example: HMC9000 sensor 5) and two batteries voltage. The main screen
displays as follows:
5.2.2 Measured Data Display
The main screen is divided into two separate viewing areas: right and left. Left area display status and
cannot be scrolled; Right area can be scrolled using
button.
★
Status,
including as below:
Status of genset , power supply status.
★
Engine,
including as below:
Engine speed, sensors 1-4 (resistance type), sensors 5-8 (current type), main battery voltage, standby
battery voltage, charger voltage, total running time, total start times and GOV output percentage.
(Note: sensor names are user-set)
★
If J1939 is enabled
，
the following ECU data will also be displayed: coolant pressure, coolant level, oil
temperature, fuel temperature, fuel pressure, inlet temperature, exhaust temperature, turbo pressure,
fuel consumption, total fuel consumption and others. (Different engine with different parameters).
★
Alarm
, including as below:
It displays all kinds of warning alarms and shutdown alarms which detected by controller.
Note:
For ECU alarms and shutdown alarms, if the alarm information is displayed, check engine
according to it, otherwise, please check the manual of generator according to SPN alarm code.
HCM9000E has no J1939 port.
★
Event log,
including as below:
Records all shutdown events (shutdown alarm, trip and shutdown alarm) and the real time when alarm
occurs.
★
Others,
including as below:
Date and time, inputs/outputs status.
