HGM9520N Genset Paralleled Controller User Manual Page 10 of 111
Parameter
Details
Digital Output 1
5A DC30V DC power supply output (relay output)
Digital Output 2
5A DC30V DC power supply output (relay output)
Digital Output 3
5A DC30V DC power supply output (relay output)
Digital Output 4
8A AC250V volt-free output (relay output)
Digital Output 5
8A AC250V volt-free output (relay output)
Digital Output 6
8A AC250V volt-free output (relay output)
Digital Output 7
1A DC30V DC power supply output (transistor output)
Digital Output 8
1A DC30V DC power supply output (transistor output)
Digital Input 1-10
Low limit voltage is 1.2V; high limit voltage is 60V;
RS485
Isolated, half-duplex, 9600 baud rate, maximum communication
length 1000m
Ethernet
Self-adapting 10/100Mbit
MSC CAN
Isolated, maximum communication length 250m; applying Belden
9841 cable or the equivalence
EMC/CE Certification
EN 61326-1:2013
Vibration Test
5 - 8 Hz: ±7.5 mm
8 - 500 Hz: 2 g
IEC 60068-2-6
Shock Test
50g, 11ms, half-sine, complete shock test from three directions, and
18 times shock for each test
IEC 60068-2-27
Bump Test
25g, 16ms, half-sine
IEC 60255-21-2
Production Compliance
According to EN 61010-1 installation category (over voltage category)
III
,
300V, pollution class 2, altitude 3000m
Case Dimensions
242mm x 186mm x 49mm
Panel Cutout
214mm x 160mm
Working Conditions
Temperature: (-25~+70)°C Relative Humidity: (20~93)%RH
Storage Conditions
Temperature:(-30~+80)°C
Protection Level
Front Enclosure: IP65 when rubber-ring gasket is installed between
the enclosure and the control panel
Rear Enclosure: IP20
Insulation Intensity
Apply AC2.2kV voltage between high voltage terminal and low voltage
terminal and the leakage current is not more than 3mA within 1min.
Weight
1.1kg