AT870 User Reference
54
5) Block Data Reading
Or Write
Figure 5. Block Data read/write
When the tag becomes Lock, error message
- Password the case which will attempt without: Memory Locked
- The case which will attempt with the password which is incorrect: Not Detect.
Is made to test generally Write in EPC Bank and time Start certainly does to be above of 2.
Until to 0~1 territories the user writing with option and becomes.
6) Input Password
Access Password inputs
1. Block moves with Read/Write screens and selects BankType with RESERVED.
2. Selects Start at 2.
3. Inputs 8 letters which are composed of 16 antilogarithms which in Data will use with
AccessPassword.
4. [Block Write] Push Button
5. Success is indicated if succeeded.
6. BankType Start after at 2 setting Length at 2, [Block Read] confirms Access Password where is
input consecutively with RESERVED.
Input “Kill Password”
1. Block moves with Read/Write screens and selects BankType with RESERVED.
2. Selects Start at 0.
3. Inputs 8 letters which are composed of 16 antilogarithms which in Data will use with
KillPassword.
4.[Block Write] Push Button.
5. Success is indicated if succeeded,.
6. BankType Start after at 0 selecting Length at 2 [Block Read], confirms Kill Password where is
input consecutively with RESERVED.
Changes Access, in order Password from Access Password territories must be becoming UnLock.
AccessPassword and KillPassword becomes Lock when case Read/Write, Access Password are
necessary.
Block Data Reading
1. Reads and character selects BankType where
does.
2. Start locations and selects Length.
3[Presses Block Read] buttons, or, presses Fn1
height. When reads
4.Block, contents the block contents is indicated in
the screen which.
5. If AccessPassword and KillPassword territories are
becoming Lock and access password without the
reading is impossible.
Block Data Write
1. Selects Write percentage BankType.
2. Selects Start locations and inputs Write contents.
3. [Block Write] presses the button, or, presses Fn2
height.
Attention: When the writing succeeds until,
continuously must press the button.
4.When Write succeeds, Success is indicated in the
screen.
