AT870 User Reference
32
A.
Keyboard Event : Print the scanned barcode data like input Keyboard
B.
Copy & Paste : Print the scanned barcode data with Clipboard
2. Terminator
You can set the termination code at the end of Barcode Value to tap “Terminator”.
A.
None : No input the termination code.
B.
CRLF(Default Setting) : Carriage Return & Line Feed (Enter code)
C.
Space : Input Space code.
D.
Tab : Input Tab key code.
3. KeySetup
You can make Hardware keys set to aim the lager beam.
A.
F1 ~ F8 Key : press those keys on the keypad to read barcode after setting.
B.
Gun1, Gun2 : Set for the gun-typed AT870 .
C.
KBD/1, KBD/2 key : Same with the F1 ~ F8 Key
D.
Left Key, Right Key key : Same with the F1 ~ F8 Key
4. Sound : set the sound On/Off after Scanning Barcode
5. Vibrator : set the Vibrator On/Off after Scanning Barcode
6. Setting : NO use.
7. Close : Make Emulator Program closed
2. 2D barcode Scanner
-
AT870 option facts
2.1 Reading 2D barcode & Symbology Setting
You can execute
AT2DScanner
to make sure that your AT870 scans barcodes exactly.
1) Executing Scanner Diagnostics
[Start] -> [Programs] -> [Scanner] -> [AT2DTScanner]
Note: If you don’t have AT2Dscanner.exe(Ver 2.0) File, please look for our staff.
2) Reading barcode
Figure 1
.
Wait till the program is initialized.
1. Press the L/R scanning button or Fn4, KBD key to scan barcode. You can also tap the “Start” on
the screen to scan a barcode when the lager beam is aimed to a barcode.
2. Make sure that your AT870 scans barcode exactly on the demo program.
