AT870 User Reference
33
* The scanned data will be displayed on the screen, if your AT870 reads a tag exactly.
* If you stop scanning before your AT870 reads a tag completely – An abnormal sound comes out.
Figure 2. 2D Scanner Function
Figure 3. Select symbology Figure 4. set up symbology with detail.
2.2 Setting the AT2DEmulator
You can input the barcode value you scanned in any application program that has a cursor after
setting the AT1Demulator. Like an input device, the AT1Demulator makes data displayed in an
application program (see the following figure)
After Scanning barcode, the value you scanned will
be displayed on the screen.
* Start H/W button is for only checking H/W.
You can set up the selected Symbology Value with
detail.
Setting all Symbology
Default All : makes all Symbologis set to be factory
default
Enable All : makes all Symbologis enabled to read
Disable All : makes all Symbologis disabled to read
You can set up the selected Symbology Value to
be factory default
