AT870 User Reference
53
3) Multi Tag Reading
Figure 3. Multi Tag Reading
4) One Tag Reading
Figure 4. One Tag Reading
1. Selects Gen2 protocols..
2.[Start] the button, with the push button [Stop] is
exchanged and attempts a reading.
3. [Stop] presses the button and to discontinue a reading
[Start] is exchanged.
4. As the tag modification which reads Tag Count
`numbers increase.
5. [Checks in Continue and] reads the tag continuously
and as the number of times counting the
correspondence UID increases.
6. [Clear] presses the button and erases the result of the
screen.
7. Fn4 Key and F7, F8 (Left ScanKey) presses but [like
pressing Start] buttons and operates.
8. [Save] presses the button and UID where is indicated
in the screen \ Flash Disk\ Currently stores at time .txt.
Ex) 20071005102239.txt
1. Selects Gen2 protocols.
2. [Start] the button, with the push button [Stop] is
exchanged and attempts a reading.
3.[Stop] Presses the button and discontinues a
reading, [Start] With is exchanged.
4. In [Continue] checked and once read the tag but
does not discontinue not to be, reads continuously
5. The program the possibility in Tag Count” boxes
counts the number of times which reads one tag,
“shows.
6. [Clear] presses the button and erases the result of
the screen.
7. Fn4 Key and F7, presses F8 (Left ScanKey) but
[Start] like pressing the button and operates
