INSTALLATION & OPERATION
7
Noise Reduction Configuration
The MOD 7 can be configured to disable the Noise Reduction cir-
cuitry. This is desirable if you are using the Projector 2 input for an
audio from video source (DVD, LaserDisk, VCR) since these sources
are
NOT
NR encoded.
This shunt determines whether the
RIGHT REAR
output is used for a
rear surround (
CS
) channel
(Factory
setting)
or an overhead (
OS
) chan-
nel.
Overhead Channel Configuration
The MOD 7a can be configured to deliver an overhead channel from digital soundtracks. If you are using a digital player
and have installed overhead speakers and amplifiers, then place this shunt in the
OS
position. Otherwise, leave it in the
CS
position.
I
nstall 4 shunts for noise reduction.
(Factory setting)
Remove shunts for audio from video
source (DVD, LaserDisc, VCR).
NR Jumper Settings
Left of Matrix Board
Overhead Surround Jumper Settings
Right Rear of Main Board
