A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
66
smarttech.com/kb/170549
Command/response definitions
Command
Response
Powered off
get netstatus
netstatus=[current]
yes
set network
network=[current]
yes
get network
network=[current]
yes
set dhcp [target]
dhcp=[current]
yes
get dhcp
dhcp=[current]
yes
set ipaddr [target]
ipaddr=[current]
yes
get ipaddr
ipaddr=[current]
yes
set subnetmask
[target]
subnetmask=[current]
yes
get subnetmask
subnetmask=[current]
yes
set gateway [target]
gateway=[current]
yes
get gateway
gateway=[current]
yes
set primarydns [target]
primarydns=[current]
yes
get primarydns
primarydns=[current]
yes
get macaddr
macaddr=[MAC
address]
yes
Field definitions
Field
Possible values
Description
current netstatus
l
connected
l
disconnected
Current status of the network interface
current network
l
on
l
off
Current status of the network module and the
VGA output
target network
l
on
l
off
Enable/Disable network module and VGA output
current dhcp
l
= on
l
= off
Enable/Disable for DHCP Networking