A P P E N D I X A
Remotely managing your system through a network interface
52
smarttech.com/kb/170549
Submenu setting
Description
Alert Condition
Sends e-mail alerts whenever
Lamp Warning
,
Low Lamp Life
,
Temperature Warning
and
Fan Lock
conditions occur. Select the
settings you want, and then click
Submit
.
N O T E
The projector sends an alert e-mail (SMART Alert) to your e-mail
address. Click
E-mail Alert Test
to confirm that your e-mail
address and SMTP server settings are correct by sending a test
e-mail (SMART Alert-Test Mail).
If the settings aren’t correct, the e-mail alert messages aren’t sent
or received successfully and warnings and notification message
aren’t available to advise of this state.
Password settings
This menu provides a security function that allows an administrator to manage projector use and
enable the administrator password function.
Submenu setting
Description
Password
When the password function is enabled, the administrator password
is required to access Web Management. Select
Disable
to allow
remote web management of the projector without requiring a
password.
N O T E S
l
The first time you enable the password settings, the default password value is four numbers,
for example, 1234.
l
The maximum allowable password length is four numbers or letters.
l
If you forget the projector password, refer to
on page 42 to set the
projector setting to factory defaults.
Simple Network Management Protocol (SNMP)
Your projector supports a list of SNMP commands as described in the management information base
(MIB) file. You can download this file by browsing to
and clicking the MIB
file’s link in the
Hardware
section for the SMART UF70 projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your SNMP
management system application, and then use it as described in your application’s user guide.
