Smart Technologies SMART Response 2011 User Manual Download

Page: 3 / 122

Important information

Safety information

Compliance

Before you use your SMART Response™ interactive response system, please read and understand

the safety warnings and precautions described in this guide. These safety warnings and precautions

instruct you in the safe and correct operation of the system and its accessories so you can prevent

injuries to yourself and others or damage to the equipment. You must always ensure that the

SMART Response system is being used correctly.

N O T E

If you own a SMART product other than a SMART Response system, refer to the user’s guide that

came with your product for relevant warnings and maintenance instructions.

Safety information

W A R N I N G

Failure to follow the installation instructions that ship with the SMART product could result in

personal injury or damage to the product.

When using your SMART Response system with a SMART Board™ interactive whiteboard

and projector, do not stare into the beam of light created by the projector. Instruct children not

to look in the direction of, or stare at, this beam of light.

Ensure that any cables extending across the floor to your SMART product are properly

bundled and marked to prevent a trip hazard.

To reduce the risk of fire or electric shock, do not expose the components to rain or moisture.

C A U T I O N

Use only the batteries provided or equivalent replacements. Do not attempt to recharge the

batteries.

Summary of Contents for SMART Response 2011



























































































































Search results

Summary of Contents for SMART Response 2011

Reviews:

Related manuals for SMART Response 2011

Brands by name

Popular brands

Smart Technologies SMART Response 2011, User Manual

Search results

Summary of Contents for SMART Response 2011

Reviews:

Related manuals for SMART Response 2011

Brands by name

Popular brands