SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
72
AF13(001110)
AF21(010010)
AF43(100110)
CS6(110000)
AF12(001100)
CS2(010000)
AF42(100100)
AF11(001010)
AF33(011110)
AF41(100010)
QoS Queue Config
On this page, you can configure a queue and add it to a Layer2 interface.
1. In the left navigation bar, click
Advanced Setup
>
Quality Of Service
>
QoS Queue Config
and then click
Add
. The following
page appears.
2. In the
Name
field, type a descriptive name for this queue.
3. In the
Interface
field, select the Layer 2 interface to be associated for this queue. Additional fields appear.
4. Fill in the fields, using the information provided in the table below.
Note:
For Dynamic WAN interfaces, the
Queue Priority
settings appear twice - once for ATM WAN QoS configuration and once
for PTM WAN QoS configuration.
5. Click
Apply/Save
to save your settings.
The fields on this page are explained in the following table.
