SMART/RG SR506n User Manual Download Page 10

Page: 10 / 157

Installing your SR506n Gateway

1. Plug the power adapter into the wall outlet and then connect the other end to the Power port of the gateway.

2. Connect the LAN port of the gateway to the network card of the PC using an Ethernet cable.

3. Turn on the unit by pressing the On/Off button on the side of the gateway.

Note:

If you use 3G WAN service, connect the 3G USB data card to a USB port of the gateway. If you use the Ethernet uplink, connect

to the WAN interface using an Ethernet cable. You cannot use the xDSL uplink, 3G WAN service, and Ethernet uplink all at the same

time.

Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to complete before

you can begin using your Internet applications (browser, email, etc.).

If you are unable to connect to the Internet, confirm that all cable connections are in place and the router’s power is turned on.

Summary of Contents for SR506n




























































































































































Search results

Summary of Contents for SR506n

Reviews:

Related manuals for SR506n

Brands by name

Popular brands

SMART/RG SR506n, User Manual

Search results

Summary of Contents for SR506n

Reviews:

Related manuals for SR506n

Brands by name

Popular brands